Skip to content
Advertisement ・ Go Ad Free

Creality's Falcon T1C squeezes two lasers into a 7.8 kg engraver

Wood and leather on one beam, metal on the other, and no module swapping in between.

Creality Falcon T1C compact laser engraver with orange tinted enclosure on a glossy reflective surface

Most engravers make you pick a lane: a blue diode for wood and leather, or an infrared source for metal. The Creality Falcon T1C puts both in one 7.8 kg box and lets you jump between them without touching a screwdriver.

Creality is aiming the Falcon T1C at people who sell what they make: home studios, small workshops and the folks running a booth at the weekend craft market. The slogan is "Built Small. Made to Perform," and the size really is the point. It's a fully enclosed, Class 1 machine built to live on a desk, not in the garage.

Vendor at an outdoor craft market loading a Creality Falcon T1C engraver on a wooden stall counter
Creality pitches the T1C at market stalls and small custom-order shops.

The 15W blue diode covers wood, bamboo, leather and dark acrylic, while the 5.5W infrared laser handles metal marking and some synthetics. Creality says the pair works with more than 350 materials. In Falcon Design Space, both lasers get preset layers, so a leather tag with a steel charm becomes one job instead of a module swap and a re-alignment.

Creality Falcon T1C on a table surrounded by engraved wooden coasters, a purple mug and a metal plate
Wood, leather and metal pieces made with the T1C's two lasers.

Speed comes from a galvo system rated up to 6,500 mm/s in specified image engraving modes. Creality's PixelFlow control tech keeps the galvo and laser power in lockstep so grayscale photos hold their detail, and the company claims up to 8x faster image processing than conventional methods under lab conditions.

Fine work is where the spot sizes matter: as small as 0.06 x 0.05 mm on the blue diode and 0.03 x 0.03 mm on the infrared. That's the territory of tiny serial text, crisp line art and dense textures.

Red laser beam engraving a detailed lion portrait into a metal plate with a Creality Falcon engraver
A close look at the fine detail work Creality promises from the T1C.

The catch with a desk-sized engraver is the bed. The standard working area is 120 x 120 mm, though an optional extension bed stretches it to 120 x 480 mm for longer pieces. One-touch autofocus, manual focus and a positioning camera round out the hardware.

Creality Falcon T1C engraver in dark gray with carry handle on its lid and a red stop button
The T1C's lid with its built-in carry handle.

On the software side, Falcon Design Space brings AI tools like outline tracing, background removal, Smart Fill and AI filters, plus the MakerMuse and CraftSeek design libraries. Creality Falcon Academy adds tutorials for newcomers who want to turn a hobby into a side business.

Now for the part your wallet cares about. In the US, the Standalone Edition carries a $1,699 MSRP, but a $50 deposit locks in $500 off for a pre-order price of $1,199. The Combo Edition adds the AP1S Air Purifier at $1,859 MSRP, or $1,259 after a $60 deposit.

Creality Falcon T1C specifications
Lasers15W blue diode laser + 5.5W infrared laser
Blue diode materialsWood, bamboo, leather, and dark acrylic
Infrared materialsMetal marking, dark acrylics, and suitable synthetic materials
Supported materials350+
Engraving speedUp to 6,500 mm/s (galvo, specified image engraving modes)
Spot size0.06 x 0.05 mm (blue diode), 0.03 x 0.03 mm (infrared)
Working area120 x 120 mm (120 x 480 mm with optional extension bed)
Weight7.8 kg
SafetyFully enclosed Class 1
Focus and positioningOne-touch autofocus, manual focus, camera-assisted positioning
SoftwareFalcon Design Space
CompatibilityWindows10 and above, MacOS11 and above
Warranty1-Year Warranty
Price (US)Standalone US$1,699 MSRP (US$1,199 pre-order); Combo with AP1S Air Purifier US$1,859 MSRP (US$1,259 pre-order)
AvailabilityPre-orders open now; global launch mid-December 2026

The Creality Falcon T1C is up for pre-order now ahead of its global launch in mid-December 2026, and you can put down a deposit here. Stay tuned to GamingTrend.com for more on the T1C, and for all your upcoming reviews, previews, and tech news!

Ron Burke

Ron Burke

Ron Burke is the Editor in Chief for Gaming Trend. Loves RPGs, action/adventure, and VR, but also dabbles in 3D printing, martial arts, and flight!

All articles

More in news

See all

More from Ron Burke

See all
Advertisement ・ Go Ad Free

Sponsored content