Skip to content
Advertisement ・ Go Ad Free

Creality knocks 10% off its Pika and Sermoon P1S 3D scanners for Black Friday

Pocket scanner or a full standalone workstation? Either way, the price just dropped from November 19 to 30.

Man scanning a metal engine part with the Creality Sermoon P1S, its blue laser lines lighting the surface

How many times have you measured a part with calipers, modeled it, printed it, and found out it was a millimeter off? A 3D scanner fixes that problem, and Creality is making two of them a little easier to justify this Black Friday.

From November 19 through November 30, Creality is taking 10% off both its pocket-sized Creality Pika and its standalone Creality Sermoon P1S in the US. Here's the damage:

  • Creality Pika: $629, down from $699 (10% off)
  • Creality Sermoon P1S: $2,069, down from $2,299 (10% off)
  • When: November 19 to November 30, on Creality's US store

Sermoon P1S: the scanner that doesn't need a PC

The Sermoon P1S is the big one. It carries its own Qualcomm processor and a 6-inch Full HD touchscreen, so you can scan, process and check your model right on the device, then hook it to a PC over a cable or Wi-Fi 7 when you want more horsepower.

Man holding the Creality Sermoon P1S scanner beside an SUV, with the hood's scan on its touchscreen
The Sermoon P1S is built to handle objects as large as a vehicle.

Creality rates it at 0.02 mm + 0.08 mm/m accuracy, using 34 cross laser lines for big surfaces, 7 parallel lines for fine detail, a single line for deep holes and NIR structured light for organic shapes. It covers anything from 5 × 5 × 5 mm³ up to 4000 × 4000 × 4000 mm³, and two quick-swap batteries keep it going away from an outlet.

Man scanning the side of a white boat with the handheld Creality Sermoon P1S, model shown on screen
Standalone mode means you can take the P1S to the object, not the other way around.

Pika: a 3D scanner that fits in a shirt pocket

If $2,069 is more scanner than your workbench needs, the Pika is the friendlier entry point. It weighs 260 g with batteries and measures 100 × 60 × 35 mm, yet it still packs 7 parallel blue laser lines plus NIR structured light.

Two Creality Pika 3D scanners on black, one showing its touchscreen, the other its blue-lit laser front
The Pika's 3-inch touchscreen sits on the back, its lasers and cameras up front.

Creality quotes up to 0.03 mm accuracy with the blue laser and up to 110 fps when tethered to a PC. It talks to Android, iOS, Windows and macOS, and a backup battery comes in the box, so a dead cell doesn't end a scanning session.

That makes it a natural fit for anyone already running a 3D printer: scan the part, clean it up, print the bracket or case that actually fits.

The Creality Pika ($629) and Creality Sermoon P1S ($2,069) are 10% off on Creality's US store from November 19 through November 30, so grab the Pika here or the Sermoon P1S here before the prices bounce back. Stay tuned to GamingTrend.com for more Black Friday deals, and for all your upcoming reviews, previews, and tech news!

Ron Burke

Ron Burke

Ron Burke is the Editor in Chief for Gaming Trend. Loves RPGs, action/adventure, and VR, but also dabbles in 3D printing, martial arts, and flight!

All articles

More in news

See all

More from Ron Burke

See all
Advertisement ・ Go Ad Free

Sponsored content